Disclosure: This post may contain affiliate links, meaning we get a commission if you decide to make a purchase through our links, at no cost to you. Please read our disclosure for more info.
A small crack here and there on your concrete driveway may not seem like a big deal, but it can lead to bigger problems down the line. With the cost of an extensive repair costing upwards of $3,000, you don’t want to wait to repair your driveway.
If you’ve never done it before, concrete driveway repair may seem out of your reach. This post will show you otherwise. Follow the five tips below to return your driveway to its former glory.
In This Post:
1. Clean Your Concrete
Before you can repair the crack in your driveway, you need to remove any debris that is stuck inside of it. Any debris that is left inside the cracks will adhere to the concrete mix and weaken it after you apply it.
Once you remove debris, it’s time to rinse your concrete to remove any dirt that can’t be removed by hand. You can easily do this with a pressure washer. If you don’t have one on-hand, you can find a rental at your local hardware store.
2. Prepare Your Patch Mix
Once you clean your driveway, it’s time to prepare your concrete patch mix. You’ll combine your mix with water in a bucket until it becomes pourable. Once this happens, you can start pouring your mix into the crack.
Once your cracks are filled with concrete, it’s time to level it. You can use a trowel for concrete leveling to make sure it’s the shape you need it to be.
3. Let Your Concrete Sit
You can’t use your driveway right after you pour your concrete. You’ll just end up with a mess. You need to give it time to dry and cure.
The amount of time this takes will depend on the patch mix you buy. Refer to your instructions to learn how long you need to wait.
4. Seal Your Concrete
If you leave your patched concrete as is after it’s finished drying, your leaving it open to the elements. But there are ways to protect it.
One way to protect your concrete is by sealing it. Doing this will help stop water from seeping into your concrete. Doing this will increase the lifespan of your driveway.
5. Take a Broom to Your Concrete
A flat and level surface is great. The problem is that it can get slippery when it gets wet. If you want to prevent this, you can give your concrete a little bit of texture.
To do this, you’ll need a broom. Use your broom bristles on the surface of your concrete to give it the texture it needs to stop slip and falls.
Concrete Driveway Repair Isn’t Hard
Dealing with concrete may seem like a hard repair at first glance, but it doesn’t have to be. If you use the concrete driveway repair tips above to seal your crack, then you’ll be well on your way to a driveway that looks great. Head to a hardware store to pick up your supplies and get started.
If you found yourself able to repair your driveway, you may be feeling especially handy. Bookmark our blog for our latest home improvement tips.