Three Pro Ways to Upgrade Your Kitchen

Three Pro Ways to Upgrade Your Kitchen

If a house is to be compared with a car, the kitchen would take the place of an engine. Kitchen is the heart of the entire house. The furnace where fuel is burnt to power the lines that feed the contents of the house. It all begins in the kitchen.

Having an advanced kitchen maintained with high hygiene standards will not only result in a more hassle free production of food, but also a more germ free environment ensuring no contamination of food.

Your health is linked with the kitchen and no element on this pale blue dot that we call Earth has more value. So if your kitchen is falling apart and is in dire need of renovation, do not delay it any further. Let’s get into some basic ideas of upgrading your kitchen without spreading a fortune.

Getting the Aesthetics Right

Let’s start with the physical properties of your kitchen. It is imperative to have an attractive place to dine in order to savor your sumptuous meal properly. Attention to detail is the keyword here.

Colors are associated with mood and your mood has a strong connection with your appetite. The color of the tiling used, appearance of kitchen accessories that are exposed such as the hood, material of fabrication of dining chairs and table and the feel it gives off, all of this blends in to have an impact on the mind of the person who is stationed within the kitchen.

The correct balance can induce hunger and comfort, hence boosting your appetite and positively impacting your health. People say function over form. In this case you cannot have function without form so due regard has to be given to the physical manifestations of the kitchen.

If you happen to be a resident of Bracknell, then look no further. Kitchen renovation in Bracknell happens to be a very simple procedure thanks to the presence of kitchen experts there who can do all the hard work for you without causing a strain on your pocket.

Conceal the Obvious

Our kitchens usually have a lot of accessories exposed to the external environment. Kitchen utensils, kitchen stands etc. are all usually out in the open. Some storage compartments used to store the various kitchen utensils that are always increasing in quantity tend to be an afterthought and they tend to stick out like a sore thumb when the kitchen is viewed as a whole. A red spoon storage cabinet will look rather absurd in a kitchen with wooden tiling and stainless steel ornaments.

Why not fix this solution while working on your kitchen. There are several ways to construct sleek mechanisms to conceal these storage options by blending them into the framework of the kitchen. Give it a go. You will realize clever engineering can go a long way in ensuring ingenious kitchen renovation.

An Extra Sink to Save the Day (From Contamination)

Kitchen cutlery when used tends to brim with all sorts of bacteria that can damage one’s health with the capacity of having severe consequences. How to avoid it? Well one rather cunning way of doing that is to construct a dirty kitchen by installing an extra sink that is situated in a different location, preferably discontinuous with the main kitchen. This creates a boundary between pristine clean surfaces of your kitchen and silverware that smells of salmonella infection.

Conclusion

Some major ways to improve your current state of kitchen have been mentioned above can ensure benefits of far ending nature that will surely manifest in the near future in the form of compliments from your guests and improved personal health. Eat healthy and stay healthy.

And where does health start from? A kitchen cleverly incarnated to suit the demands of the consumer in the departments of aesthetics and function. Everything is linked; you can’t have one without the other. Invest now on your kitchen renovation, invest now on your well-being.

Remodel 101: The Only 7 Kitchen Cabinet Styles that You Need

Remodel 101: The Only 7 Kitchen Cabinet Styles that You Need

Every homeowner would relate to the fact that kitchens tend to wear out and lose their charm pretty quickly. After all, your kitchen tolerates prolonged exposure to heat, pressure, and moisture every day. That’s why renovation and remodelling are essential and effective solutions that every homeowner swears by to keep their house new and fabulous.

However, when it comes to remodelling your kitchen cabinets, you might be running out of fresh ideas. To help you with that and update you on the latest trends for kitchen cabinets, here is a specially curated list of the top 7 kitchen cabinet styles that you need to check out.

If you want to know more about quartz countertops for your kitchen, click here to access the complete, comprehensive guide.

Top 7 Kitchen Cabinet Styles

Here are the top 7 kitchen cabinet styles every homeowner needs to check out.

1. Countertop Cabinets

If you are looking for kitchen cabinet ideas that are gorgeous and equally useful, then this one’s for you. Countertops and cabinets are the two backbones that support all your kitchen work. But if you are running short on space and budget, you should definitely consider combining the two.

Instead of having separate cabinets and countertops, you can build cabinets that have countertops on themselves. This will help you store all your utensils and appliances in the cabinets and go about your daily kitchen duties right on top of it -on the countertops.

You can also jazz it up a little by choosing a beautiful surface like granite, laminate, and quartz. If you go by the latest trends, then quartz countertops are much in vogue right now.

2. Glass-Front Cabinets

Glass-front cabinets are an age-old kitchen cabinet trend that is making a superb comeback in the home décor industry. The most significant benefit of these cabinets is that you can see through them and know precisely what is kept where without opening the cabinet door. This makes your work a lot easier and helps you save time on finding utensils and appliances.

Nowadays, everybody has a busy schedule, and it is not possible to remember exactly where each item in the kitchen is kept. In this case, opening every cabinet to find what you’re looking for will be an excruciating task. Glass front cabinets cut off this extra hassle and provide you with a simplified solution. You get to keep your appliance organized as well as to keep an eye on them.

3. Floor-To-Ceiling Cabinet

This style of cabinet is generally used when you cannot offer enough space for cabinets. In this case, to fit everything you have in your kitchen in a small space an entire portion of the wall is converted to cabinets.

Another added benefit that comes with floor-to-ceiling cabinets is that you do not have to worry about the paint and seal for the wall behind it. After all, it will always remain hidden by the cabinet.

Floor-to-ceiling cabinets also offer a spacious storage unit for your kitchen utensils and appliances. This will ensure that your kitchen remains organized and you have enough space for future additions.

4. Recessed Wall Cabinet

If your kitchen is too small to spare enough space for a cabinet, you should consider opting for recessed wall cabinets. In this style, instead of building a cabinet on your wall, the cabinets are built inside the wall. Since the storage unit goes inside the wall, you save a lot of space, and your kitchen does not look cramped. You can choose to keep it open or add doors to the cabinet, and it will store all your kitchen items without stealing extra space from your kitchen.

5. Open Cabinets

Not every homeowner wants to have doors on the cabinets. Some of them, especially the ones who have a hard time remembering where they keep things, prefer open cabinets. It works the same way as the usual ones. The only difference is that there is no cover to hide the contents of the storage units.

However, it does bring along the downside of always having to keep your cabinets organized. But it also makes your job easier to keep track of all the items in your kitchen.

6. Customized Cabinets

Your kitchen cabinets do not have to follow the usual structure. You can add to its existing features and make it more useful. This can be done by making additions like pull-out trays, bread boxes, and dustbins. You can also integrate your kitchen sink or your dishwasher within the cabinets to save space and give your kitchen an overall elegant touch through contemporary designs.

Another popular way to customize the cabinet is by integrating it with the oven. In this case, you get to cook and access the items required for cooking while standing at the same place. Some people even go a step ahead and integrate them with built-in appliances like refrigerators and microwave ovens.

7. Integrated Kitchen Cabinets

While some people prefer independent cabinets situated at the corner of the kitchen, a lot of people today prefer integrated kitchen cabinets. Depending on your requirements, an integrated cabinet generally has two rows of cabinets.

One attached is to the wall and the other to the floor, leaving space for countertops and an oven in between. The two sets of cabinets are then conjoined at a certain point. Generally, a taller cabinet at a corner is used to join the two rows. The taller cabinet needs to start at the base and be at level with the top row cabinets. These cabinets make your kitchen more compact and offer a contemporary touch. Together it gives a stunning makeover to your simple old kitchen.

Endnote

Since kitchen renovation is not something you do every day, you must take your time to go through all the available designs and choose what suits your style the best. The list of cabinet designs that we have created has been made, keeping beauty as well as usability in mind. After all, kitchen cabinets serve an important purpose in our daily life, and you cannot just rely on outward appearances when choosing the perfect style.

How to Prepare Your Space For a Modern Kitchen Remodel

How to Prepare Your Space For a Modern Kitchen Remodel

The average kitchen remodel can take weeks or even months to complete. And, don’t forget about the many steps of the design and completion process. From initial drawing plans and permits to final runs-throughs, kitchen remodeling is quite the undertaking.

But before a modern kitchen remodel begins, are you prepared? Without proper planning, remodeling day and the weeks after can be a stressful and chaotic time. So, it is important that you have some basic organization skills and plans in place to make this transition as smooth as possible.

Consider this your ultimate kitchen remodel checklist. These tips can help you plan more efficiently and worry less before demo day!

Purge and Donate

To prepare for a kitchen remodel, set aside the weeks (or months) before to evaluate your kitchen collection. Consider creating two boxes or areas.

One area should be for items you will purge or throw out. And another area will be for items you plan to donate.

Clean and Organize

Home renovations are an excellent time to finally clean areas you forgot about (like drawers or the back pantry). Leave the kitchen clean and cabinets empty. This will save time and aggravation on remodeling day.

Organize food and the kitchen equipment you decided to keep. Don’t just throw everything into boxes or bags and set it aside. Neatly pack, organize, and label your belongings.

This will come in handy once the kitchen is complete. You will be able to easily locate everything and put it back in place in no time.

Prepare a Makeshift Kitchen

Living without a kitchen can be a trying time. If you have a family or are on a tight budget and prefer not to eat out every night, how can you manage? Before remodeling begins, prepare a makeshift kitchen.

You can use a folding table or another space in the home to set out a few key items and ingredients. For example, a hot water electric kettle or hot plate could be useful appliances. And if your renovation is set for a long time, invest in a small refrigerator and microwave to prepare easy meals.

Set Realistic Expectations

Do you have realistic expectations about your home improvement timeline? Check this article out to get a better understanding of a kitchen remodel timeline.

It is important that you are clear on how long the renovation process will last. But most importantly, set your expectations for bumps in the road.

Your kitchen cabinet order may be delayed. Or, your plumber may find a serious drainage issue that will take time to resolve. If you become too hyperfocused on the timeline or finish date, you will be easily disappointed.

Go With the Flow

Remodeling a kitchen is hard work, but the reward will be well worth it. Enjoy this remodeling period and remember to be thankful and excited about your new home improvement. If any delays or issues come up, go with the flow.

This is all part of the process. And soon enough your first meal in your new kitchen will make all the hassle well worth it.

A Modern Kitchen Remodel Can Be Easy and Fun if You Plan Ahead

Your modern kitchen remodel is soon underway! But, remember to follow these tips and best practices before remodeling day. Purge, donate, and organize your belongings to save time and stress.

To save money and time eating out, consider creating a makeshift kitchen in another area of your home. And when it comes to renovations? Set your expectations and go with the flow.

If you found these remodeling tips helpful, check out our other home stories.

11 Things You Need to Know About Epoxy Countertop Resurfacing

11 Things You Need to Know About Epoxy Countertop Resurfacing

If you have never heard of epoxy before, there are some things you should know before choosing to use epoxy for countertop resurfacing. Make sure you know all the pros and cons before moving forward with epoxy as it can greatly save you money in the long run.

Epoxy can be a great DIY project as long as you follow all directions carefully. It can also be a more cost-effective way to cover existing damage on your countertops. Let’s review some of the must-knows before beginning to use epoxy.

You Will Need to Spend Some Time Researching

Epoxy has some pretty strict instructions that need to be followed. We suggest you watch some video tutorials or speak with someone who has used epoxy before. It is not a process to begin lightly or without knowing exactly what needs to be done.

Try to research and get as much information as you can before starting.

Make Sure to Practice

Since epoxy needs to be poured and torched in a specific way it is also a good idea to practice. Try pouring some sample pieces to guarantee that you have the technique down.

Some companies even offer testing kits to try at home before committing.

Covering Your Furniture Is Necessary

Epoxy can be a very messy job even for someone who is experienced. You will want to completely mask anything that is even remotely near the epoxy. This could include the floor, the cabinets, under the cabinets, and the place where you are mixing the epoxy components.

A Skim Coat May Be Necessary

Depending on the material of your counters, a skim coat may be necessary before you can begin to pour the epoxy itself. This is most common for porous surfaces such as wood or granite. The skim coat is an important process and should not be skipped.

It will help to seal the material and avoid air bubbles in the final product.

Intense Measuring Is Needed

Make sure to have accurate square footage and buy accordingly. It is recommended that you buy slightly more materials for the epoxy to make sure that you can cover all the surfaces and have some leftover.

This is crucial for covering any craters or other mistakes that may pop up. The quicker they are covered the less likely they are to be noticeable later.

Know the Facts

Curing is the most important word you may hear when it comes to epoxy. In order for your counters to be able to be used, the epoxy needs about 12-24 hours to cure. This does not mean you can now use your counters like normal though.

It can take up to 30 days for the counter to be fully cured. So, for the first month or so you need to be extremely careful with your counters. Do not put heavy objects on the counter as things could leave a dent or impression.

For the first 30 days, the counter will not be scratch or heat resistant either.

A Professional Might Be Needed

Some people opt to use a professional after realizing how difficult doing epoxy can be. A professional may be able to do it much quicker than you can. They also know some tried and true tricks that minimize problems and mistakes.

If you still want to DIY, ask for advice at the local hardware store or from the local contractor.

You Might Want to Adjust the Thermostat

The temperature in your home can greatly affect the epoxy process. The ideal temperature for your home is 70-75 degrees Fahrenheit. If the temperature is below this the cure can be much softer than it needs to be. This could greatly affect durability.

The epoxy itself also needs to be 70-75 degrees Fahrenheit. These temperatures should be kept throughout the whole process, including 2-3 days before you start and 24 hours after you have finished.

Mix Carefully

The ratio should always be 1:1 for the two ingredients needed for epoxy. This is the most important part of the whole epoxy process. Badly mixed epoxy could result in soft spots and other problems.

You Can Manipulate It

Epoxy can be reset and manipulated the most within the first 40-45 minutes. It is easiest to do with a brush. Then you can pour a new layer over the part that was removed with the brush.

Many people get nervous and rush through the pouring. While the pouring does need to be done promptly, you should also take your time. Don’t be nervous. If you mess up, simply pull out the area that does not look good. Just remember to do it quickly.

You’ll Have to Torch After Pouring

It is possible to over torch the epoxy, so only torch the necessary amount. The torching process is meant to get out any bubbles that may have formed during the pouring process. If you over pop the bubbles or get the torch too close, you can easily put burn marks into the epoxy.

Choosing Quartz

You can see now that epoxy can be a tasking process. It takes research, time to make, and time to get your kitchen back to full use. While it can be cost-effective if done correctly, the problems make many people avoid it.

One of the most popular alternatives is quartz countertops. They are much more durable, easy to get installed, and resistant to virtually everything.

The installation for quartz usually only takes one day. It is engineered off-site and then brought to your home and installed. Sometimes within a matter of just a few hours. It is ready to be used as soon as it is installed, so no waiting 30 days like you would with epoxy.

While epoxy can be very durable, quartz is even more so. It is completely resistant to mold, mildew, bacteria, scratches, dents, and stains. It is also pretty heat resistant. Click here to see how quartz countertops could change your kitchen forever.

Dishwasher Drain Clogged: 5 Tips for Fixing the Issue

Dishwasher Drain Clogged: 5 Tips for Fixing the Issue

A dishwasher is one of the most important parts of your kitchen, and a clogged drain can prevent this invaluable appliance from performing its job functions. Luckily, there are tons of tips and tricks you can use if you have a dishwasher drain clogged within your home.

The way you go about fixing a drain clogged in your dishwasher depends on whether or not it connects to a garbage disposal drain. As such, clogged drain remedies range from mixtures of common household ingredients to checking your drain hose.

To learn all about the ways you can fix a drain clogged with sludge and other debris, then keep reading. You’ll learn the top 5 ways of fixing a drain clogged in your dishwasher, getting this important appliance back up and running in no time.

Reasons for a Clogged Dishwasher Drain

If you’ve found yourself saying, “My drain is clogged. What caused it?” then your first step is to ask yourself what you put down your sink. Your dishwasher and sink use the same drainage line, so your sink can affect how your dishwasher performs.

There are four areas a clog usually occurs in your kitchen. These areas include the dishwasher, sink, air gap, and garbage disposal. If you notice your sink filling with water when your dishwasher is in use, one of these four areas most likely has a clog.

A garbage disposal may cause a clog if you’re putting things such as liquid fat, grease, and oil down the drain. If this is the case, you may cause a clog and notice problems within your dishwasher.

Signs of a Dishwasher Drain Clogged

While a little water is normal, if you notice more and more water accumulating in the bottom of your dishwasher, you may have a clog. You may also hear a gurgling noise coming from kitchen drains, a sign a clog is forming.

If your dishwasher or kitchen sink begins to drain slowly, a clog is forming. It’s best to take immediate action before this clog becomes an even bigger issue.

Water backing up into your kitchen sink when your dishwasher is in use points to a clog. Turn off your dishwasher and check to see if food is trapped in your garbage disposal, as this can cause water to back up. If the problem persists, you have a clog that needs attention immediately.

After running your dishwasher, dirty dishes may indicate there is a clog. This is because a clog may prevent water from entering your dishwasher, leaving you with dishes that were never cleaned.

These reasons are why you should follow five tips to unclog a dishwasher drain.

1. Identify the Issue

Now that you know the causes of a drain clogged in your dishwasher, you can look to see what may be causing the issue. If you suspect the problem is a garbage disposal being used improperly, then oils trapping food particles in your drain may be to blame.

Once you determine the cause of your clog, you can work on fixing a drain clogged in your kitchen plumbing. If your dishwasher has dishes in it, remove them and prepare your dishwasher for any work that needs to be done, gathering your tools.

Turn off your dishwasher, along with any electricity running to it and to your garbage disposal. Remove standing water as well, as these steps are very important for safety reasons.

2. Investigate the Plumbing

Identifying the problem is half the issue. Next, investigate the plumbing in your kitchen. Ensure your drain hose is thoroughly connected to your dishwasher as well as your garbage disposal or sink.

Do your hose clamp and drain solenoid show signs of wear and tear? If so, replace them, as they may be the culprit for a clogged drain. Next, investigate the air gap cylinder to ensure nothing is stuck inside of it, also causing a clogged drain.

3. Dishwasher Filter

Your dishwasher has a filter that traps anything that comes loose while your dishwasher is doing its job, such as leftover food particles. Clean this area to ensure your filter is working properly. If needed, unscrew the filter to clean it, accessing difficult to reach dirt and debris accumulation.

4. Unclog Your Garbage Disposal

Begin by unplugging your garbage disposal, making sure to never perform maintenance on a garbage disposal with power running to it. Additionally, avoid pouring chemicals down your drain, as there are tons of negative consequences to your pipes and the environment.

Instead, pour ¼ cup baking soda into the drain, and then a ½ cup of vinegar. Once it fizzes and sits in the drain for a few minutes, flush it out with very hot tap water. Keep the water running for several minutes, working to push the clog through.

You can do this several times to help break the clog up. Plungers can also help to loosen a clog. Remember that you have to clamp the end of the dishwasher line before plunging your sink, as the hose can come off the disposal nozzle at the point of entry.

5. Vinegar and Baking Soda Mixture

If your clog persists, vinegar and baking soda may do the trick. Mix equal parts of the two and pour them into the dishwasher drain. Let the mixture sit for a minimum of 15 minutes before pouring hot water down the drain.

Run your dishwasher’s rinse cycle and check to see if the clog has fixed itself. If you still have a clogged dishwasher drain, it’s time to call in a professional plumber.

Keep Your Dishwasher Clog-Free

While dishwasher clogs can cause issues within your kitchen’s plumbing, there are ways to treat them at home and to prevent them. To protect your dishwasher filter from clogging, be sure to rinse food from your plates before putting them in the dishwasher.

Be sure to use your dishwasher on a regular basis, as water and detergent help to flush out your appliance and prevent clogs from forming. Keep your dishwasher’s filter clean and free from dirt and debris which lead to a dishwasher drain clogged with sludge. Periodically use vinegar to keep your dishwasher working properly, filling a bowl with two cups of vinegar and placing it on the bottom rack.

Run your dishwasher without detergent and allow the vinegar to help rid it of bacteria and odors.

For more articles about DIY maintenance, make sure to check out the rest of our informative articles. Our website has access to tons of great information, perfect for all your home-repair needs.

What to Consider Before Buying a Farmhouse Faucet

What to Consider Before Buying a Farmhouse Faucet

Choosing the best faucet for farmhouse sink installation is important to the overall function and aesthetics of your kitchen.

According to https://sinkengineering.com/best-faucet-for-farmhouse-sink/, The right faucet can change the entire look of a sink area, and since farmhouse sinks are so distinctive, you want a faucet that complements its style statement.

Apron sink faucets are generally larger than the average kitchen faucet. Because of the sink’s depth and width, the faucet should have adequate proportions that accommodate the size.

These faucets are often taller and include multiple functions, such as a pull-down sprayer head and flow control. A large sink is meant to be used for most kitchen tasks both large and small, so you will want to install a faucet that can cover all the bases.

The sturdy construction is also a plus when looking for a faucet of this type. You will want something that will stand repeated heavy use.

6 Things To Consider Before Buying a Farmhouse Faucet

1. Height

The best farmhouse style faucet will have a large vertical span that allows you to maneuver big dishes and other items in and out of the sink.

Unlike other faucets with straight or shortened spigots, the height of a farmhouse faucet is often increased with a high curve or angular shape. One advantage of this feature is that it looks beautiful and graceful in addition to being practical.

2. Construction

Most rustic kitchen sink faucets are made from a limited amount of materials. These materials often include brass, stainless steel and plastic.

Brass is the traditional base material for kitchen faucets due to its sturdy and reliable nature. However, stainless steel has increased in popularity due to its durability.

Plastic can be durable, more inexpensive, and is guaranteed to not rust over time. Many of these materials are also built to look fashionable while performing their practical duties.

3. Type of Handles

The type of handles on a faucet can change the entire aesthetic of your sink area. For example, a country style kitchen faucet usually has two handles for the more traditional look.

Modern styles usually have one lever handle or touch less capabilities. Space is also something to consider when choosing the handle type.

For smaller areas, a single lever handle might be more practical, and it can offer a cleaner look to the overall appearance of your kitchen.

4. Pull-Down Sprayer

A farm kitchen faucet normally comes with a sprayer as a matter of course. Since you will no doubt be using your sink for all kitchen jobs both large and small, a sprayer can come in handy.

The pull-down sprayer is super convenient since it is an all-in-one type of design, and it can minimize the amount of space used due to its retract ability. The only downside of a pull-down sprayer is that it can be tougher to repair or replace if it malfunctions.

5. Color

A farmhouse sink faucet will offer several style options and should blend and complement the surrounding style of your sink and kitchen.

Color is an important factor to consider. You can mix or match the styles in your kitchen, and your faucet can factor into its color scheme. Finishes can make a difference too. A more muted finish offers a more subdued look, while a high polish finish draws the eye.

6. Flow Control

Because a farmhouse kitchen faucet is usually taller than other types of faucets, the water has a larger distance to cover from a spigot to sink drain.

This is why flow control is important to prevent major splashing. The higher the flow control, the less splashing there will be. Also, it takes more water to fill up a large farmhouse sink, so higher gallons per minute, or GPM, can fill a sink more efficiently.

Materials Guide for The Best Farmhouse Faucet

Brass

Many a farmhouse kitchen faucet is made from brass either on the outside or inside. Brass is the most common material for the inner workings of a faucet due to its ability to withstand long-term use. When used as an outer material, it offers a warm golden hue that has a more traditional appearance.

Stainless Steel

Stainless steel is timeless, modern and durable. These are a few reasons why a faucet for farmhouse sinks use stainless steel as both an inner and outer finish. Unlikely to rust or corrode over time, stainless looks beautiful and is easily cleaned.

Chrome-Plated Plastic

The more moderately-priced farm kitchen faucet models offer plastic finishes that can look beautiful on a budget. Unlike metals, plastic is guaranteed to not rust when in contact with water. Plastic can also be finished with a chrome material that looks very similar to a more expensive stainless steel.

Ceramic Valves

Most types of kitchen faucet for farmhouse sink sport ceramic valves in their handles and inner workings. These types of valves keep the handles turning smoothly and prevent rust or mineral buildup over time. Because valves are a hassle to replace, ceramic materials are preferred.

Finishes

The finish of a faucet can make or break the style and look of a kitchen sink area. Whether a faucet is made from stainless steel, brass or some other type of material, the glaze or finish is important to consider. Muted finishes tend to disguise fingerprints and other water spots more than high polish finishes. Always check the care instructions so you know whether your faucet will require high maintenance.

What Size Faucet for a Farmhouse Sink?

Farm sink faucet installation is one that is in proportion to the sink itself. The larger and deeper the sink, the larger the faucet can be. Conversely, if you have a smaller sink, you do not want a huge faucet that will visually overpower it.

The smaller the faucet, the more flexibility it will have, whereas larger faucets tend to swivel and move less due to their size. Usually this immobility is compensated by having a retractable sprayer head that can reach every corner of a large sink. Most farm kitchen faucets made today have sprayer heads that offer this capability.

Also, if you have a shallower sink, you will want a faucet that is smaller and proportionate. Because a larger faucet generally has stronger water flow, they can cause too much splashing and mess in a sink that cannot accommodate it. To avoid messes, a smaller faucet is appropriate when dealing with sinks that are on the smaller side.

Bigger does not always mean better, but it can be more convenient. Be aware that larger faucets often use more water in less time. If conserving water is a priority to you, a smaller faucet may be preferable. Deciding the best size of faucet depends on the size of your sink and water efficiency needs.

Farmhouse Sink Faucet Installation Instructions

Materials Needed:

  • Silicone putty or sealant
  • Drill and/or wrench
  • Nuts and screws
  • Farmhouse kitchen faucet rubber gaskets

Step One

Turn off the main water supply. Thread the faucet through the hole in the counter or sink. Farmhouse sink faucet installations will come with full instructions and rubber gaskets. Attach these gaskets and tighten screws and nuts. Use a wrench if necessary.

Note: Some aprons sink faucets will need to be drilled into place.

Step Two

Seals the area at the base of the faucet where the spigot and countertop meet. Place a bead of silicone putty or sealant around these areas. If you have separate handles, also apply sealant around the base of the handles to prevent leaks. Though a faucet for farm sink models usually fit tight and snug against these areas, it’s always good to seal them.

Step Three

Turn on the main water supply and test for any leaks or gaps. Fix as needed.